# Finite Element Analysis Jobs

What I need? • I need a tutorial of the water tank model with connectors at the base (seismic isolation) and perform modal analysis (obtain convective and impulsive fundamental period) and earthquake analysis, including the model in ABAQUS. Project description: - Model of a water tank of 30 meters in diameter (circular) with connectors at the base (seismic isolators), 18 meters high of the...

CFD Analysis for Datacenter Cooling Following scope is considered -CFD Analysis will be performed 1. To obtain Airflow distribution of HVAC System 2. To find Room temperature distribution for full load and HVAC sys. Running 3. To find Failsafe time for the server racks in case of a power outage for the HVAC system Please refer attached drawings Kindly share your quote with a timeline for comple...

I have a program that does 2D nonlinear analysis for frames. I want to have the ability to solve this in 3D frames. I need experienced civil engineers in the [login to view URL] in matlab

I am looking for a Playhouse Load analysis - Wind load , Self weight & Snow load analysis experts. CONTACT ME IF YOU ARE A RIGHT PERSON.

It's a structural engineering-based project. A study on the stability of slope with irregular particles Each and everything has to provide. It shouldn't be complicated to build a model because the material is provided in the attached files. You can use the same irregular particles which are in the file. If you can do it 100% Okay then it's very easy to provide all material about it....

- To design trolley with towbar that is removable and provide with 2D engineering drawing with dimensions & 3D Model - Perform FEA structural load testing & stress analysis on the main trolley and all the components - To provide design calculation ( Eg force distribution) & a short write up about the FEA analysis done on the trolley

I am designing a very tall inflatable column for advertisement. Something like an inflatable dancing tube man, but without the dancing part, stable, no waving arms, 100 meters high. Weight of the advertisement at the top of the tube - 10Kg, needs to withstand 25kmh side wind. I require CFD simulation data and an answer to the question what is the required internal wind speed velocity (m3s) to ke...

For a research at the university, we have had problems to model in Ansys Workbench a circular steel tank with water, on connectors (COMBIN40 and COMBIN14, which represent seismic isolators), we are looking for someone to make the computational model for us. The elements COMBIN40 and COMBIN14 represent the hysteresis curve of a seismic isolator. The water should be modeled with acoustic elements t...

Looking for Optimization of designfor a tank to be made in LDPE for mass production. Understanding of Computational fluid analyis, Fea analysis, design optimisation, LDPE design and rotomoulding will help.

1. Wind turbine model (Simulink and Matlab code) 2. Neural network model (Simulink or Matlab) 3. Link wind turbine model and neural network 4. Simulation and report 5. Signal sinario (depends on wind condition (direction, speed, temperature, strength, and others) must be generated and to send wind turbine 6. After deciding, we can share material. signal generation of wind condition (wind speed, s...

Axial crush strength analysis of a box-section member using abaqus and make a report

Greetings all, I would like to have a professional with experience in the heat transfer, finite element methods, and MATLAB subject to support on writing a paper. The discerption of the paper is as follow: develop a paper with the emphasis on the “Modeling and analysis heat transfer (1-D Heat conduction application) using FEM”. You can choose the topic from your interests, work rela...

An industrial mixer stirs fluid inside a rectangular vessel. One side of the vessel is heated. The flow can be approximated as two dimensional and the configuration is shown in figure 1. When the mixer is started, the fluid has an initial temperature of T(x, y, t = 0) = y through the domain, where y is the vertical location. At time t0 = 0 (s), the mixer begins to rotate the fluid inside the vesse...

An industrial mixer stirs fluid inside a rectangular vessel. One side of the vessel is heated. The flow can be approximated as two dimensional and the configuration is shown in figure 1. When the mixer is started, the fluid has an initial temperature of T(x, y, t = 0) = y through the domain, where y is the vertical location. At time t0 = 0 (s), the mixer begins to rotate the fluid inside the vesse...

Pipeline optimization using simulation softwares like cfd

Need support with completing Structural Equation Modeling using SPSS AMOS

I want to create the structure of pull up bar with the specific condition. Including roller joint. The dimensions will be provided to you in 3View drawing. I want a result in both dynamic and static load. The due date is 23/10 and the structure look like the photo attach but simpler

Model building in PLAXIS 2D Modelling dimensions and geometry

Run simulations on Ansys for turning operation using explicit dynamics in Ansys software and simulations should be run for many data points using MATLAB. Should know how to connect Ansys and Matlab

1. Transient Heat transfer analysis. [Done] 2. Interface damage due to temperature change.{Partially done, convergence issues] 3. High-speed railway loading on CRTS-II slab track.

We have a steel pedestrian foot bridge that is about 55m long that needs to have a dynamic analysis using program such as Midas or Etabs.

CFD analysis of wind turbine. I want to very my thesis. I hope you can help me. Thankyou